Grand Brass Lamp Parts

1in Height X 1/8ips. Slip Through Stamped Neck - Brass Plated Finish

1in Height X 1/8ips. Slip Through Stamped Neck - Satin/Brushed Nickel Finish

1in Height X 1/8ips. Slip Through Stamped Neck - White Finish

1in Height X 1/8ips. Slip Through Stamped Neck - Black Finish

1in Hex Hollow Brass Tubing - Unfinished Brass0.025 Material Thickness

8/32 Thread - 1in Long - Steel Knurled Head Thumb Screw - Polished Nickel Finish

1/4-20 Thread - 1in Long - Headless Steel Stud - Unfinished Steel

1in Long - 1/4-20 Thread - Knurled Brass Battery Head Screw - Unfinished Brass9/16in Head Diameter X 3/8in Height1/4-20 UNC Thread Length is 1in Long 

1/4-27 Thread - 1in Long - Headless Steel Stud - Unfinished Steel

1in. Long 1/4ips (1/2in. O.D) Unfinished Brass Round Hollow Pipe with 1/4ips Male 3/16 inch long thread on both ends.

1in. Long 1/8ips (3/8in O.D) Nickel Plated Finish Round Hollow Pipe with 1/8ips Male 3/16 inch long thread on both ends.

1in. Long 1/8ips (3/8in O.D) Unfinished Brass Round Hollow Pipe with 1/8ips Male 3/16 inch long thread on both ends.

1in Long X 3/8ips (5/8in OD) Male Threaded Unfinished Brass Hollow Pipe Stem. Each End Threaded 1/4in Long on Both Ends.

1in UNFINISHED BRASS PIPE WITH 3/8 IPS FEMALE THREADS (5/8in Deep Thread) 3/4in. O.D.

6/32 Thread - 1in Long - Headless Steel Stud - Unfinished Steel

8/32 Thread - 1in Long  - Headless Brass Stud - Unfinished Brass

8/32 Thread - 1in Long - Headless Steel Stud - Unfinished Steel

8/32 Thread - 1in. Long -  Slotted Round Head Solid Brass Screw - Unfinished Brass

8/32 Thread - 1in. Long -  Slotted Round Head Steel Screw - Black Finish

8/32 Thread - 1in. Long -  Slotted Round Head Steel Screw - Brass Plated Finish

8/32 Thread - 1in. Long -  Slotted Round Head Steel Screw - Polished Nickel Finish

8/32 Thread - 1in Long - Steel Knurled Head Thumb Screw - Brass Plated Finish

1in Long X 8/32 Type P Zinc Plated Steel Thumb Screw. Features Made to be tightened and loosened with finger pressure Typically used where frequent adjustment or disassembly is required. Fully...

8/32 Thread - 1in Long - Type S Steel Thumb Screw with Shoulder - White Zinc Plated. Features Made to be tightened and loosened with finger pressure Typically used where frequent adjustment or...

1in Long - 8/32 UNC Threaded - Slotted Flat Head Screw - Antique Brass

1in Long - 8/32 UNC Threaded - Slotted Flat Head Screw - Black Finish

1in Long - 8/32 UNC Threaded - Slotted Flat Head Screw - Polished Nickel

1in Long - 8/32 UNC Threaded - Slotted Flat Head Screw - Unfinished Brass

1in Long 5/16-27 UNS Fully Threaded Zinc Plated Steel Hollow Nipple Features 5/16in Outer Diameter 0.2in Inner Diameter 27 Threads Per Inch

1in Long X 1/2ips / NPS Zinc Plated Steel Fully Threaded Nipple

1in Long X 1/8ips Threaded Flat Sided Steel Nipple - White Zinc Plated

1in Long X 1/8ips Threaded Hollow Thin Wall Nipple for Easy Wire Way. Inner Diameter of the nipple is approximately 0.30 inches for easy wire pass. 

1in Reverse Checkring with 1/4ips Tapped Through Threaded Hole. Fits in and Caps 1in Tubing.

1in Reverse Checkring with 1/8ips Tapped Through Threaded Hole. Fits in and Caps 1in Tubing.

1in Equal Eye Solid Bright Brass Finish S hook made from .105 Inch Dimeter thick material. 

12in. Stamped Brass Check Ring. 1/8ips. Slip Through Center Hole - Unfinished Brass For Use With Paper Drip Candle Covers

1in Stamped Steel Checkring with 1/8ips (7/16in) Slip Center Hole - Black Finish

1in Translucent / Clear Silicone Washer with 1/8ips Slip Through Hole

1in Modern Brass Slipring with 8/32 Threaded Set Screw. Slips 1 inch Diameter Rods and Tubes. 

1in. Adjustable Die Handle - 8in. Long

1in. Antique Brass Finish Spun Vase Cap

1in. Antique Brass Plated Check Ring. 1/8ips. Slip Through Center Hole

1in. Black Rubber Washer with 1/8ips. Slip Through Hole

1in. Brass Crystal Pin

1in. Brass Plated Check Ring. 1/4ips. Slip Through Center Hole

1in. Brass Plated Check Ring. 1/8ips. Slip Through Center Hole

1/4-20 UNC Female Threaded Tapped Blind Hole - 1in. Diameter Brass Ball - Unfinished Brass

1in. Diameter - 1/4-20 UNC Threaded Through Brass Ball - Unfinished Brass

1/4-27 UNF Female Threaded - 1in Diameter Brass Ball - Antique Brass Finish. Tapped Blind Hole. Fits a Harp!

1/4-27 UNF Female Threaded - 1in. Diameter Brass Ball - Satin Nickel. Female Tapped Blind Hole. Fits a Harp!

1in. Diameter Solid Brass Ball with 1/4ips. Female Tapped Blind Hole

1in. Diameter Steel Ball with 1/8ips. Female Tapped Blind Hole

1in. Diameter Solid Brass Ball with 1/8ips. (3/8in.) Female Tapped All the Way Through Hole - Polished Nickel Finish

1in. Diameter Solid Brass Ball with 1/8ips. (3/8in.) Female Tapped All the Way Through Hole

1in. Solid Brass Ball 3/8-16 UNC Female Threaded Hole - Unfinished Brass

1in. Diameter - 3/8ips Threaded Tapped Through Brass Ball - Unfinished Brass

8/32 UNC Female Threaded Tapped Blind Hole - 1in. Diameter Solid Brass Ball - Unfinished Brass.

1 in. STEEL WASHER WITH 1/4ips (9/16in) SLIP THROUGH HOLE. 16 GAUGE (1/16in) THICK.

1 in. STEEL WASHER WITH 1/8ips (7/16in) SLIP THROUGH HOLE. 16 GAUGE (1/16in) THICK.

1in. Diameter - Steel Washer - 1/8ips. Slip Center Hole - Black Finish

1 in. BRASS PLATED STEEL WASHER WITH 1/8ips (7/16in) SLIP THROUGH HOLE. 18 GAUGE (1/20in) THICK.

1in. Nickel Plated Finish Steel Washer with 1/8ips. Slip Through Hole

1 in. WHITE ZINC PLATED STEEL WASHER WITH 1/8ips (7/16in) SLIP THROUGH HOLE. 16 GAUGE (1/16in) THICK.

1/8ips Female Threaded Brushed / Satin Nickel 1in. Diameter Ball. Tapped Blind Hole

1in. Diameter Solid Brass Ball with 1/8ips. Female Tapped Blind Hole

1in. Diameter Nickel Plated Solid Brass Ball with 1/8ips. Female Tapped Blind Hole

1/8ips Female Threaded Tapped Blind Hole. - 1in. Diameter Solid Brass Half Ball - Polished Nickel Finish

1/8ips Female Threaded Tapped Blind Hole. - 1in. Diameter Solid Brass Half Ball - Unfinished Brass

1in. Height X 1/8ips. Slip Through Stamped Neck - Antique Brass Plated Finish