- Home
- Holders - Lamp Shade Fitters
- 2-11/16in. Wide Brass Bell Holder with Screws and pressed in grommets - Unfinished Brass
2-11/16in. Wide Brass Bell Holder with Screws and pressed in grommets - Unfinished Brass
- SKU:
- HO2-14B
- UPC:
- MPN:
- HO2-14B
- Material Type:
- Brass
- Type:
- Holder - 2-1/4in Fitter
- Color/ Finish:
- Unfinished Brass
- Center Hole:
- 1/8ips Slip Through
- Height:
- 2.687 (2-11/16in)
- Width:
- 2.687 (2-11/16in)
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 10 - 99 | and pay only $5.90 each |
Buy 100 or above | and pay only $5.15 each |
MSRP:
Now:
$6.60
Was:
— You save
Description
2-11/16in. Wide Brass Bell Holder with Screws and pressed in grommets - Unfinished Brass
View AllClose
Related Products


1/8ips. - Female Threaded - Heavy Duty Brass Baby Loop with Wire Way - Unfinished Brass
MSRP:
Now:
$1.60
Was:
7/8in W X 1-9/16in H - 1/8ips. Female Threaded Unfinished Brass Heavy Duty Baby Loop with Wire Way
LO102


5/8in. x 1/8ips. Threaded Brass Hollow Nipple
MSRP:
Now:
$0.29
Was:
5/8in. x 1/8ips. Threaded Brass Hollow Nipple
NI0-58X18BR


1/8ips - Leviton - E-26 Base Porcelain Keyless Lamp Socket with Screw Terminals
MSRP:
Now:
$4.45
Was:
Leviton - E-26 Base Porcelain Keyless Lamp Socket with Screw Terminals. 1/8-27ips. Female Die-Cast Cap with Set Screw. 660W 125V/250V
Documentation
UL Documentation
SO10045


E-26 Porcelain Socket with 1/8ips. Cap and 10ft. Brown and Ground Wire Leads
MSRP:
Now:
$10.50
Was:
E-26 Porcelain Socket with 1/8ips. Cap and 10ft. Brown and Ground Wire Leads. Cap is 1/8ips. Female Thread. Brown Wire is 18/2 SPT-1. UL Listed Rated 660W 250V
Documentation
SO10085BRG


1/8in Thick Oval Lamp Chain - Unfinished Brass
MSRP:
Now:
$21.00
Was:
1/8in Thick Oval Lamp Chain - Unfinished Brass Links measure 1-7/8in X 7/8in. *Sold in pre-cut one yard lengths. Longer custom assembled lengths available by special request. NO RETURNS ON ORDERS OF...
CH143


1/8in. Thick Solid Brass Small Elongated Oval Lamp Chain - Unfinished Brass
MSRP:
Now:
$16.00
Was:
1/8in. Thick Solid Brass Small Elongated Oval Lamp Chain - Unfinished Brass Links Measure 1-1/2in. X 5/8in. *Sold in pre-cut one yard lengths. Longer custom assembled lengths available by special...
CH727

6in. Unfinished Brass Pipe with 1/8ips. Female Thread
MSRP:
Now:
$5.10
Was:
6in. Long Unfinished Brass Pipe 1/2in Diameter Round Hollow Pipe with 1/8ips. Female Thread on both ends.
PIC06BR


5in Long - 1/8ips Thread (3/8in O.D) Threaded Pipe Stem with 3/16in long thread on both ends - Unfinished Brass
MSRP:
Now:
$2.20
Was:
5in. Long 1/8ips (3/8in O.D) Unfinished Brass Round Hollow Pipe with 1/8ips Male 3/16 inch long thread on both ends.
PIBR05-0X8


1/8ips Male X 1/8ips Female Beaded Nozzle - Unfinished Brass
MSRP:
Now:
$0.90
Was:
1/8ips Male X 1/8ips Female Threaded Unfinished Brass Beaded Nozzle
Help
Please note Lamp thread sizes are NOT the same as their respective diameter. Please review these helpful resources...
NO305


Opal White Hand Blown Bell Shade with 2-1/4in. Neck
MSRP:
Now:
$24.50
Was:
Opal White Hand Blown Bell Shade with 2-1/4in. Neck
GL51
Customers Also Viewed


2-1/4in. Deep Holder with Screws - Unfinished Brass
MSRP:
Now:
$6.15
Was:
2-1/4in. Unfinished Brass Deep Holder with Screws
HO2-14D


2-1/4in. Deco Bell Holder with Screws - Unfinished Brass
MSRP:
Now:
$8.80
Was:
2-1/4in. Deco Bell Holder with Screws - Unfinished Brass
HO2-14DEC


2-1/4in. Unfinished Cast Brass Ribbed Holder with Screws
MSRP:
Now:
$14.50
Was:
2-1/4in. Unfinished Cast Brass Ribbed Holder with Screws
HO2-14CR
Temporarily Out of Stock


2-1/4in. Brass Bell Holder with Key Slot and Screws - Unfinished Brass
MSRP:
Now:
$8.95
Was:
2-1/4in. Unfinished Brass Bell Holder with Key Slot and Screws
HO2-14BWS


2-1/4in. Screw In Holder with Porcelain Two Piece E-26 socket - Unfinished Brass
MSRP:
Now:
$10.00
Was:
2-1/4in Fitter Flat Unfinished Brass Shade Holder with 1-5/8in Hole. (3) 8/32 Threaded Grommets. Includes Screws and Leviton - Porcelain Two Piece Ring Type E-26 to E-26 Screw-In Adaptor. Rated 660W...
HO2-14SCRBR


2-1/4in Fitter Flat Shade Holder with 1-3/8in Hole - Unfinished Brass
MSRP:
Now:
$5.95
Was:
2-1/4in Fitter Flat Shade Holder with 1-3/8in Hole - Unfinished Brass (3) 8/32 Threaded Grommets. Includes Screws.
HO2-14FSCR


2-1/4in. Cast Brass Uno Thread Shade Holder - Unfinished Brass
MSRP:
Now:
$9.50
Was:
2-1/4in. Unfinished Cast Brass Uno Thread Shade Holder
HO2-14SUNO


2-1/4in. Cast Brass Deep Ribbed Spoke Holder with 1/8ips. Slip Center Hole - Unfinished Brass
MSRP:
Now:
$8.90
Was:
2-1/4in. Unfinished Cast Brass Deep Ribbed Spoke Holder with 1/8ips. Slip Through Center Hole
HO2-14DRS


2-1/4in. Flat Holder with Screws - Unfinished Brass
MSRP:
Now:
$5.95
Was:
2-1/4in. Flat Holder with Screws - Unfinished Brass
HO2-14F


2-1/4in Deep Vented Holder with Screws - Unfinished Brass
MSRP:
Now:
$8.15
Was:
2-1/4in Deep Vented Holder with Screws - Unfinished Brass
HO2-14DVT